Panasonic S-ICX Technical Manual Download Page 88

Page: 88 / 327

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 4. User Maintenance

Section 700 - Operation

To set the Mode Schedule:

Action

Result

1. If not already in User Maintenance mode, enter User Main-

tenance mode. (See “To enter User Maintenance mode:” on
page 75.)

81-

User MAINT

displays

2. At the

level, enter

3. Press the

HOLD

key.

8107-

System Mode

displays

4. Press the

HOLD

key.

Mode Schedule

displays

5. Press the

HOLD

key.

000

:HHMM

PTN 1-1 Start T

displays

6. Enter

the start time in hours (two characters) and minutes

(two characters) for the Pattern 1 - first

mode.

Note:

To clear an entry or existing data, press the

FL/R

key.

7. Press the

HOLD

key.

001

PTN 1-1 Mode

displays

8. Enter the desired mode for Pattern 1 - first (

- None,

Day 1,

- Day 2,

- Night,

- Night (1),

- Night (2)).

Note:

To clear an entry or existing data, press the

FL/R

key.

9. Press the

HOLD

key to store the entry.

Next pattern mode displays

10. To set additional mode schedules, press the volume up or

down key or press the

HOLD

key to move to the desired

mode.

Desired pattern mode displays

11. Repeat steps 6-10 until all patterns and modes are set.

(There are 3 total patterns with 5 start time/modes each.)

Note:

Entry Positions are listed in Table 12 on page 89.

12. Press the

MEMORY

key to exit the entry mode.

Mode Schedule

displays

13. To return to the top menu level (

), press the

PROG

key.

OR...

To exit the User Maintenance mode, press the

ON/OFF

key.

81-

User MAINT

displays

OR...

ON/OFF

LED goes off

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands