Panasonic S-ICX Technical Manual Download Page 256

Page: 256 / 327

256

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 6. DSLT Features

Section 700 - Operation

Operation

To use Step Call (Reset Call) to dial another extension (after a busy extension):

Example:

You dial extension 213, but it is busy. To dial extension 214, enter

Hardware Requirements

•

N/A

Considerations

•

The second extension called using the Step Call (Reset Call) feature must have the same number
of digits as the first extension.

•

If you program the System for Step Call (Reset Call), the following features are not available:
Camp-on (Ext. no. +

[UK/HK] or

[Taiwan, Malaysia, Indonesia]), Callback Request (Ext.

no. +

[UK/HK] or

[Taiwan, Malaysia, Indonesia]), Message Waiting (Ext. no. +

[UK/HK]

[Taiwan, Malaysia, Indonesia], Message Waiting (Priority for VM) (Ext. no. +

[UK/HK]

[Taiwan, Malaysia, Indonesia]), Intercom Busy Override (Ext. no. +

[UK/HK] or

[Taiwan, Malaysia, Indonesia]).

Timed Reminder Call

Description

Your telephone can act as an alarm clock with the Timed Reminder Call feature.

Operation

To set the Timed Reminder Call feature:

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Dial an extension number.

Busy tone

3. Dial the last digit of the next extension number.

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the Timed Reminder Set code (default =

*31

3. Enter the time you want the Timed Reminder Call to sound.

(Enter the time in 24-hour format. For example,

0100

for 1

AM,

1300

for 1 PM.)

4. Replace the handset or press the

ON/OFF

key.

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands