manualshive.com logo in svg

Panasonic S-ICX, Technical Manual

The Panasonic S-ICX Technical Manual is a comprehensive user guide designed to assist you in maximizing your product experience. This manual provides step-by-step instructions, troubleshooting tips, and technical specifications. Download this valuable resource for free from manualshive.com and unlock the full potential of your Panasonic S-ICX.

Share
Download
background image

Section 700 - Operation

Chapter 3. System Features

S-ICX-50-700

S-ICX (International) issued October 2000

 27

•

FF1-0-01: Alpha Tagging (Name/No. Display)

Considerations

•

ISDN (PRI/BRI - T Point) can get calling party information.

•

Caller ID service must be ordered from the local telephone operating company or the 
interexchange carrier.

•

Caller ID data is usually sent between the first and the second rings of the incoming trunk call. 
The trunk may be programmed to immediately ring at the station or wait until after the Caller ID 
digits are received before ringing at the station. If the trunk is programmed to ring immediately, 
the Caller ID digits will not display until after they are received and processed.

•

Caller ID numbers may be denied from being sent for some callers (private). Some long distance 
carriers may not provide Caller ID data (out of area).

•

Caller ID only support the single format (number only). Multiple format (number and name) is 
not supported.

•

Prior to Version 4.5, Caller ID supported only the number format. Version 4.5 and higher 
supports selection of the number or name.

•

In Version 4.5, Caller ID displays the highest ringing priority call (call queued to ring at the 
target extension immediately after the present call terminates).

Caller ID Alpha Tagging

Description

If the received Caller ID phone number matches any number in the System Speed Dials (SSD) 
(SSD000-SSD199), then the associated SSD name can be displayed as the Caller ID information 
instead of the Caller ID phone number. Alternatively, the Direct Dial Inward (DDI) name may be 
displayed instead.

In Version 4.5 and higher, Caller ID information will be shown on the second line of the LCD display 
when an incoming call rings a display phone with a conversation already in progress. Second 
incoming calls include extension Camp-on, extension Call Wait, queued DIL, both Appearance and 
non-Appearance calls (Exchange Line, MCO, virtual or DN, recall, BLF).

Hardware Requirements

•

ISDN (PRI = VB-44540UK, BRI = VB-44530UK)

Considerations

•

The system may be set to display Caller ID in one of two priorities as follows:

Priority Choice 1

•   CID name (future feature)
•   Alpha tagging if matched
•   DDI name

Priority Choice 2

•   DDI name
•   CID name (future feature)

Summary of Contents for S-ICX








































































































































































































































































































































Reviews:

No comments

Related manuals for S-ICX

Garmin GMA 340 Supplemental Operation Manual preview
GMA 340
Brand: Garmin Pages: 10
Systemline Multi-room system Installation Manual preview
Multi-room system
Brand: Systemline Pages: 22
Karel OP48 User Manual preview
OP48
Brand: Karel Pages: 13
Gigaset Gigaset 5010 Instructions Manual preview
Gigaset 5010
Brand: Gigaset Pages: 26
GE 55909320 User Manual preview
55909320
Brand: GE Pages: 100
Telos DESKTOP DIRECTOR 2101 User Manual preview
DESKTOP DIRECTOR 2101
Brand: Telos Pages: 46
SWIT Electronics Co.,LTD. CW-S150 User Manual preview
CW-S150
Brand: SWIT Electronics Co.,LTD. Pages: 11
Alcatel Temporis 55-EX User Manual preview
Temporis 55-EX
Brand: Alcatel Pages: 2
Uniden DECT2185 Guide Utilisateur preview
DECT2185
Brand: Uniden Pages: 40
GE 2-9750/2-9763 User Manual preview
2-9750/2-9763
Brand: GE Pages: 18
Rockville RWM-4US Owner'S Manual preview
RWM-4US
Brand: Rockville Pages: 10
XtendLan XL-VIP-1920 User Manual preview
XL-VIP-1920
Brand: XtendLan Pages: 63
C.J. ANDERSON WRT-10-H Series Installation Manual preview
WRT-10-H Series
Brand: C.J. ANDERSON Pages: 8
Bunn Water Quality System EQHP-TWIN 108SP Specification Sheet preview
Water Quality System EQHP-TWIN 108SP
Brand: Bunn Pages: 2
ANSMANN INDUCTION BATTERY CASE Operating Instruction preview
INDUCTION BATTERY CASE
Brand: ANSMANN Pages: 28
Serene centralalert CA-CX User Manual preview
centralalert CA-CX
Brand: Serene Pages: 21
red lion RL14 Instruction Sheet preview
RL14
Brand: red lion Pages: 8
Plantronics CS70 Series User Manual preview
CS70 Series
Brand: Plantronics Pages: 12

Brands by name

Popular brands

Load more brands