Panasonic S-ICX Technical Manual Download Page 289

Page: 289 / 327

Section 700 - Operation

Chapter 7. SLT Features

S-ICX-50-700

S-ICX (International) issued October 2000

289

To cancel DND for another extension:

Hardware Requirements

•

N/A

Related Programming

•

FF1-0-03: Extension COS (Manual DND Override Send)

•

FF1-0-03: Extension COS (Forced DND Override)

•

FF1-0-03: Extension COS (DND Set/Clear)

•

FF1-0-03: Extension COS (DND Set/Clear Other)

•

FF1-2: Dial Plan

•

FF3-0: Extension COS

Considerations

•

Forced DND override is available.

•

DND override function is available by Busy Override code.

Flash Send

Description

Flash send allows you to send a flash to a trunk.

Operation

To send a flash on an trunk:

Related Programming

•

N/A

Action

Result

1. Lift the handset.

Intercom dial tone

2. Enter the DND Cancel by Other Phone code (default =

750

[UK/HK] or

750#

[Taiwan, Malaysia, Indonesia]).

3. Dial the extension number.

4. Replace the handset.

Action

Result

1. Hookflash to place the current trunk call on hold.

Dial tone is returned

2. Enter the SLT Flash Send access code (default =

765

A flash is sent on the trunk. The trunk will
respond according.

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands