Panasonic S-ICX Technical Manual Download Page 174

Page: 174 / 327

174

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 5. Key Telephone Features

Section 700 - Operation

To answer a message waiting indication (callback):

To cancel a callback message:

Note:

Message waiting/callback messages may also be cancelled by either the originator or the

receiver by calling the other party.

Hardware Requirements

•

N/A

Considerations

•

The System has priority message waiting for 3rd-party Voice Mail. See “Voice Mail Integration
(Third Party)” on page 68.

3. While the phone is still ringing, or when you hear the busy

tone, enter the Message Wait Set code (default =

[UK/

HK] or

[Taiwan, Malaysia, Indonesia]).

MSG Accepted

displays

4. Replace the handset or press the

ON/OFF

key.

•

Message

lamp flashes at called exten-

sion

•

MSG EXT XXX

displays (where XXX

= calling extension number) or name
of calling extension displays at called
extension

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the Message Wait Callback code (default =

) or

press the

MSG FF

key if using a large-display phone.

OR...

Press the Flexible Function (FF) Key assigned as a Message
Callback Key (Version 4.5 and higher).

• Telephone automatically dials exten-

sion that sent the message waiting indi-
cation

•

Message

lamp goes off when your call

is answered

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the Callback Request Cancel code (default =

) or

press the

MSG FF

key if using a large-display phone.

MSG Cleared

displays

3. Replace the handset or press the

ON/OFF

key.

Message

lamp goes off

Action

Result

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands