Panasonic S-ICX Technical Manual Download Page 96

Page: 96 / 327

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 4. User Maintenance

Section 700 - Operation

Hardware Requirements

•

N/A

Considerations

•

N/A

Set Special Day Mode

Description

(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page
36.)

You can specify up to 20 special days for the System. For each special day, you can specify up to 5
modes settings.

Operation

To set the Special Day Modes:

11. Repeat steps 9-10 as many times as necessary to enter the

desired Text Message.

Note:

Press the

FL/R

key to clear the entire entry.

12. Press the

HOLD

key to store the entry.

Next message number displays

13. To set additional text Messages, press the volume up or

down key or press the

HOLD

key to move to the desired

Send Text Message.

Desired Text Message displays

14. Repeat steps 9-13 until all Send Text Messages are

entered.

15. Press the

MEMORY

key to exit the entry mode.

Enter Msg #

displays

16. To return to the top menu level (

), press the

PROG

key.

OR...

To exit the User Maintenance mode, press the

ON/OFF

key.

81-

User MAINT

displays

OR...

ON/OFF

LED goes off

Action

Result

1. If not already in User Maintenance mode, enter User Main-

tenance mode. (See “To enter User Maintenance mode:” on
page 75.)

81-

User MAINT

displays

2. At the

level, enter

3. Press the

HOLD

key.

8107-

System Mode

displays

4. Enter

Action

Result

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands