Panasonic S-ICX Technical Manual Download Page 165

Page: 165 / 327

Section 700 - Operation

Chapter 5. Key Telephone Features

S-ICX-50-700

S-ICX (International) issued October 2000

165

Handsfree Answerback

Description

Handsfree Answerback allows you to answer an intercom call without lifting the handset.

The System must be programmed for Voice Calling for you to use this feature. You must press

during a call to switch from Tone Calling to Voice Calling.

Operation

To answer calls using Handsfree Answerback:

Hardware Requirements

•

N/A

Considerations

•

Handsfree Answerback can be used to respond to only voice calls from other extensions - not
tone calls.

•

Both the called and calling parties must belong to an Extension Class of Service (COS) that
allows Voice Calling.

Handsfree Operation

Description

Handsfree Operation allows you to use all available System features without lifting the handset. Any
speakerphone can be operated handsfree.

Operation

To initiate Handsfree Operation:

Action

Result

1. When the intercom call arrives, confirm that the MIC LED

is off.

(If it is lit, press the

MIC

key to turn it off.)

2. Speak into the microphone to answer.

Action

Result

1. Press the

ON/OFF

key.

Phone is offhook with access to full range
of calling features

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands