Panasonic S-ICX Technical Manual Download Page 138

Page: 138 / 327

138

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 5. Key Telephone Features

Section 700 - Operation

To supervise the transfer of a call to an outside number:

Unsupervised Transfer

When completing an unsupervised transfer, the transferring party hangs up before the third party
answers.

Operation

To transfer a call to another extension without supervising the transfer:

3. When the call is answered, inform the third party of the

transfer.

Talk-EXT Name or Number

displays

4. Complete the transfer:

• If On-Hook Transfer is enabled for your Extension COS,

replace the handset or press the

ON/OFF

key.

• If On-Hook Transfer is disabled, press the

PROG

key (or

RELEASE

key if using DSS/72).

Action

Result

1. While on a call, press the

HOLD

key.

Intercom dial tone

2. Seize a trunk line and dial the number to which the call is to

be transferred.

3. When the call is answered, inform the third party of the

transfer.

Talk-EXT XXX

displays (where XXX =

extension)

4. Complete the transfer:

• If On-Hook Transfer is enabled for your Extension COS,

complete the transfer by replacing the handset or pressing
the

ON/OFF

key.

• If On-Hook Transfer is disabled, press the

PROG

key (or

RELEASE

key is using DSS/72).

Original call LED light turns red

Action

Result

1. While on a call, press the

HOLD

key.

Intercom dial tone

2. Dial the extension number to which the call is to be trans-

ferred.

3. Complete the transfer:

• If On-Hook transfer is enabled for your Extension COS,

replace the handset or press the

ON/OFF

key.

• If On-Hook is disabled, press the

PROG

key (or

RELEASE

key if using DSS/72).

Action

Result

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands