Panasonic S-ICX Technical Manual Download Page 126

Page: 126 / 327

126

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 5. Key Telephone Features

Section 700 - Operation

To cancel Call Forwarding-All Calls:

Call Forwarding - Busy

When Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.

Operation

To set Call Forwarding - Busy:

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the appropriate Cancel Call Forwarding code:

• For your extension, enter

731

(UK/HK) or

731#

(Taiwan,

Malaysia, Indonesia).

• For another extension, enter

751

(UK/HK) or

751#

(Tai-

wan, Malaysia, Indonesia).

3. If cancelling Call Forwarding for another extension, dial the

extension number.

4. Replace the handset or press the

ON/OFF

key.

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the appropriate Set Call Forwarding code:

• For your extension, enter

722

(UK/HK) or

722#

(Taiwan,

Malaysia, Indonesia).

• For another extension, enter

742

(UK/HK) or

742#

(Tai-

wan, Malaysia, Indonesia).

3. If setting Call Forwarding for another extension, dial the

number of the extension whose calls you want to forward.

4. Enter the destination number:

• If forwarding to another extension, dial the extension

number.

• If forwarding to an outside number, press the

key then

enter the SSD bin number.

Note:

Any outside number used for Call Forwarding must

already be programmed into speed dialling. (For informa-
tion, see “Speed Dialling” on page 187.)

5. Replace the handset or press the

ON/OFF

key.

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands