Panasonic S-ICX Technical Manual Download Page 22 | Manualshive

Page: 22 / 327

background image

22

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 3. System Features

Section 700 - Operation

AEC Disconnect

Description

This feature allows the System to send a disconnect signal of 1 second to an analog device indicating
that the calling party has hung up (terminated the call). This feature is useful with a Third-party Voice
Mail or an Answering Machine. By default this feature is disabled.

Hardware Requirements

•

AEC port

Considerations

•

The 1 second time duration of the disconnect signal is fixed. (It cannot be changed.)

Attendant Groups

Description

An attendant phone is often used as a central answering point for other extensions. In addition,
attendant phones frequently have special capabilities for monitoring and programming extensions.

You can reach the assigned attendant group by dialling the feature access code for Attendant Calls
(usually

0

). If an attendant phone is available but does not answer within a set time, the call will move

to the next available attendant phone. If all members of the attendant group are busy for a specified
time, the call can be forwarded to other extensions or another hunt group. The system allows up to 20
extensions to be included in an attendant group.

Hardware Requirements

•

N/A

Considerations

•

The System allows one attendant group for each system mode (Day 1, Day 2, and Night).

•

An attendant group can contain both real extensions and virtual extensions. If virtual, several
phones can be made to ring at the same time.

•

Attendant groups can use only Pilot Terminal Hunt Group or Pilot Distributed Hunt Group. For
more information, see “Hunting Groups” on page 42.

•

The pilot number for an attendant group is flexible (i.e., any extension number can be designated
as the pilot [not a real extension]).

•

If a member of the attendant group has Do-Not-Disturb (DND) or Call Forwarding - All set, that
phone is temporarily removed from the attendant group.

•

If a member of the attendant group has Call Forwarding - Busy set and the extension is busy, the
call goes to the next phone in the attendant group.

•

If all members are busy for the duration of the busy queuing timer, the call can be forwarded to
another hunt group or another extension.

•

Attendant groups support the following call types:

• CLI (Called Line Identification) / Direct Dial Inward (DDI)
• Direct Inward System Access (DISA)
• Extension calls

«
...
20
21
22
23
24
...
»

Summary of Contents for S-ICX








































































































































































































































































































































Reviews:

No comments

Related manuals for S-ICX

Brand: GAI-Tronics Pages: 22

Brand: Uniden Pages: 68

W60P Telesystem

Brand: Yealink Pages: 2

Brand: Yealink Pages: 2

Brand: Yealink Pages: 2

CP930W Telesystem

Brand: Yealink Pages: 14

Brand: Yealink Pages: 2

Brand: Earthworks Audio Pages: 5

Brand: Ferguson Pages: 13

Brand: Furuno Pages: 2

Syn-Apps VIP-801A-SA

Brand: Valcom Pages: 2

Brand: Vista Pages: 9

Brand: Eircom Pages: 47

Brand: Uniden Pages: 1

Brand: AEI Pages: 6

Brand: Emerson Pages: 22

Brand: Emerson Pages: 22

Brand: Emerson Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands