Panasonic S-ICX Technical Manual Download Page 224

Page: 224 / 327

224

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 6. DSLT Features

Section 700 - Operation

Operation

To set Call Forwarding - No Answer:

To cancel Call Forwarding - No Answer:

Call Forwarding and Do-Not-Disturb

The System allows you to set or cancel both Call Forwarding and Do-Not-Disturb (DND) for your
own extension in one step.

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the appropriate Set Call Forwarding code:

• For your extension, enter

723

(UK/HK) or

723#

(Taiwan,

Malaysia, Indonesia).

• For another extension, enter

743

(UK/HK) or

743#

(Tai-

wan, Malaysia, Indonesia).

3. If setting Call Forwarding for another extension, dial the

number of the extension whose calls you wish to forward

4. Dial the destination number:

• If forwarding to another extension, dial the extension

number.

• If forwarding to an outside number, press the

key then

enter the SSD bin number.

Note:

Any outside number used for Call Forwarding must

already be programmed into speed dialling. (For instruc-
tions, see “Speed Dialling” on page 249.)

5. Replace the handset or press the

ON/OFF

key.

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the appropriate Cancel Call Forwarding code:

• For your extension, enter

733

(UK/HK) or

733#

(Taiwan,

Malaysia, Indonesia).

• For another extension, enter

753

(UK/HK) or

753#

(Tai-

wan, Malaysia, Indonesia).

3. If cancelling Call Forwarding for another extension, dial the

extension number.

4. Replace the handset or press the

ON/OFF

key.

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands