Section 700 - Operation
Chapter 4. User Maintenance
S-ICX-50-700
S-ICX (International) issued October 2000
85
Hardware Requirements
•
N/A
Considerations
•
N/A
Set Extension Names
Description
You can assign names to each extension, even if the extension is not a display telephone. When the
extension is called, the name appears on the display. For more information on the digital key
telephone display, see “Display Information” on page 152.
Operation
To set extension names using either a large-display or small-display phone:
Action
Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the
81
level, enter
03
.
3. Press the
HOLD
key.
8103-
Extension Name
displays
4. Press the
HOLD
key.
0
:
EXT Number/Name
displays
5. Press the
HOLD
key.
Enter EXT #
displays
6. Dial the extension number.
7. Press the
HOLD
key.
A B C D E F XXX
displays (where
XXX = extension number)
8. Enter the extension name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
91.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 92.)
Note:
Press the
FL/R
key to clear any existing data.
9. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
