Panasonic S-ICX Technical Manual Download Page 76

Page: 76 / 327

S-ICX (International) issued October 2000

S-ICX-50-700

Chapter 4. User Maintenance

Section 700 - Operation

Note:

Your extension’s COS must be properly set to allow User Maintenance access. Also, only one

user may enter User Maintenance or System Programming at a time.

Set Absence Messages

Description

This menu item specifies absences messages.

Operation

To set Absence Messages using either a large-display or small-display phone:

Action

Result

1. If not already in User Maintenance mode, enter User Main-

tenance mode. (See “To enter User Maintenance mode:” on
page 75.)

81-

User MAINT

displays

2. At the

level, enter

3. Press the

HOLD

key.

8112-

Absence Message

displays

4. Press the

HOLD

key.

Enter Msg #

displays

5. Enter the Message number (

0-9

6. Press the

HOLD

key.

A B C D E F

displays (where X = Absence Message

number)

7. Enter the Absence Message (up to 15 characters):

• If using a

large-display phone

, press the soft key next

to the desired row of letters. (See Example 1 on page
91.)

• If using a

small-display phone

press the appropriate

one-touch key. (See Example 2 on page 92.)

Note:

Press the

FL/R

key to clear any existing data.

8. Use the bottom row of FF keys to select a single letter.

• See Example 1. Large-Display Phone on page 91.

• See Example 2. Small-Display Phone on page 92.

Notes:

• Press the

key to erase a single entry.

• Press the

key to enter a space.

9. Repeat steps 7-8 as many times as necessary to enter the

desired Absence Message.

Note:

Press the

FL/R

key to clear the entire entry.

10. Press the

HOLD

key to store the entry.

Next message number displays

Summary of Contents for S-ICX








































































































































































































































































































































Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands

Panasonic S-ICX, Technical Manual

Search results

Summary of Contents for S-ICX

Reviews:

Related manuals for S-ICX

Brands by name

Popular brands