Panasonic S-ics Page 110 Technical Manual Download

Page: 110 / 327

110

S-ICX (International) issued April 2002

S-ICX-64-700

Chapter 4. User Maintenance

Section 700 - Operation

To set SSD names using either a large-display or small-display phone:

Action

Result

1. If not already in User Maintenance mode, enter User Main-

tenance mode. (See “To enter User Maintenance mode:” on
page 79.)

81-

User MAINT

displays

2. At the

level, enter

3. Press the

HOLD

key.

8102-

SSD Assignment

displays

4. Enter

5. Press the

HOLD

key.

SSD Name

displays

6. Press the

HOLD

key.

Enter SSD #

displays

7. Enter the SSD bin number (

000

799

8. Press the

HOLD

key.

A B C D E F XXX

displays (where

XXX = SSD bin number)

9. Enter the SSD name:

• If using a

large-display phone

, press the soft key next

to the desired row of letters. (See Example 1 on page
95.)

• If using a

small-display phone

press the appropriate

one-touch key. (See Example 2 on page 96.)

Note:

Press the FL/R key to clear any existing data.

10. Use the bottom row of FF keys to select a single letter.

• See Example 1. Large-Display Phone on page 95.
• See Example 2. Small-Display Phone on page 96.

Notes:

• Press the

key to erase a single entry.

• Press the

key to enter a space.

11. Repeat steps 9-10 as many times as necessary to enter the

desired SSD name.

Note:

Press the FL/R key to clear the entire entry.

12. Press the

HOLD

key to store the entry.

Next SSD bin number displays

13. To set additional SSD names, press the volume up or down

key or press the

HOLD

key to move to the desired SSD.

Desired SSD bin number displays

14. Repeat steps 9-13 until all SSD names are entered.

15. Press the MEMORY key to exit the entry mode.

Enter SSD #

displays

16. To return to the top menu level (

), press the

PROG

key.

OR...

To exit the User Maintenance mode, press the

ON/OFF

key.

81-

User MAINT

displays

OR...

ON/OFF

LED goes off

Summary of Contents for S-ics








































































































































































































































































































































Search results

Summary of Contents for S-ics

Reviews:

Related manuals for S-ics

Brands by name

Popular brands

Panasonic S-ics, Technical Manual

Search results

Summary of Contents for S-ics

Reviews:

Related manuals for S-ics

Brands by name

Popular brands