Panasonic S-ics Technical Manual Download

Page: 175 / 327

Section 700 - Operation

Chapter 5. Key Telephone Features

S-ICX-64-700

S-ICX (International) issued April 2002

175

Mute Function

Description

Mute Function allows you to block outgoing audio to the other party while on a call.

With 44-Series phones, audio can be blocked through both the microphone and the handset. (For

handset mute, an FF key must first be assigned as a

MIC

key.)

Operation

To block outgoing audio using the Handset Mute (VB-D4,VB-D6/VB-442XX-Series

phones only):

To block outgoing audio using the Microphone Mute:

Hardware Requirements

•

N/A

Considerations

The fixed MIC key works both for handset mute and microphone mute. But only VB-D4,VB-D6/VB-

442XX-Series

phones have the fixed MIC key, so others must assign an FF key as a MIC key.

Offhook Monitor

Description

Offhook Monitor lets you put a call on speaker while the handset is offhook. You can still

communicate with the other party via the handset, but you will also be able to hear the other party on

the phone’s speaker. The other party can only hear what is transmitted through your handset however,

because audio is not transmitted through your microphone.

Action

Result

1. During a handset call, press the

MIC

key.

MIC LED blinks.
Outgoing audio is blocked through
phone’s handset

2. To turn Mute off, press the

MIC

key again.

Action

Result

1. During a handset call, press the

MIC

FF key

MIC LED off.
Outgoing audio is blocked through
phone’s microphone

2. To turn Mute off, press the

MIC

FF key again.

MIC LED on.

Summary of Contents for S-ics








































































































































































































































































































































Search results

Summary of Contents for S-ics

Reviews:

Related manuals for S-ics

Brands by name

Popular brands

Panasonic S-ics, Technical Manual

Search results

Summary of Contents for S-ics

Reviews:

Related manuals for S-ics

Brands by name

Popular brands