178
S-ICX (International) issued April 2002
S-ICX-64-700
Chapter 5. Key Telephone Features
Section 700 - Operation
To answer an OHVA:
To transfer a call using OHVA:
To reply to off-hook voice announcement with a text message:
3. Enter the OHVA feature access code (default = 8).
•
OHVA EXT XXX
displays if busy
extension called (where XXX = calling
extension.
•
INT
LED flashes
4. Make your announcement
Action
Result
1. Press the OHVA Split key.
Note:
You must program an FF key as a split key (default =
*71
) to use this feature.
Split key flashes red
2. To return to the previous call, press the Split key again.
The OHVA originating party receives
Busy signal.
Action
Result
1. Press the
HOLD
key to put the current call on hold.
Current call on hold
2. Dial the extension number to which the call is being trans-
ferred.
Busy signal
3. Enter OHVA feature access code (default = 8)
and announce
the call to be transferred.
4. If transfer is:
• Not accepted, retrieve the call by pressing the associ-
ated flashing MCO key (if an appearing call) or by
pressing the
HOLD
key (if a non appearing call).
• Accepted, and On-hook Transfer is enabled for your
extension, replace the handset or press the
ON/OFF
key.
If On-hook Transfer is not enabled for your extension,
press the
PROG
key (or
RELEASE
key if using DSS/
72).
Action
Result
1. Press the
MSG
FF key.
2. Enter the Reply Text Message number (
1-9
,
0
). See Table 19
on page 177 for the text message replies.)
The text message reply appears on the
camped on telephone display.
Action
Result
