230
S-ICX (International) issued April 2002
S-ICX-64-700
Chapter 6. DSLT Features
Section 700 - Operation
Hardware Requirements
•
N/A
Considerations
•
N/A
Call Park
You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient
of the call.
Trunk, extension, and network calls may be parked.
There are two ways for an extension to park a call on the ICX. One way is to park the call at the
receiving extension and to retrieve the parked call at another extension by dialling the park answer
code plus the parking extension number. The other way is to park the call at another extension and
dial the park transfer answer code at the other extension to retrieve the call. Beginning with Version
5.0, an Extension Group Pickup code allows the user to pick up a Transfer Recall (only on non-
appearing calls), a Hold Recall, and a Station Park Recall.
Operation
To park a call on this extension:
To retrieve a call parked at the originating extension from another extension:
To park a call at another extension:
Action
Result
1. While on a call, press the
HOLD
key.
• Current call on hold
2. Enter the Call Park Hold access code (default =
771
).
3. If necessary, page the party that needs to retrieve the call.
Action
Result
1. Lift the handset or press the
ON/OFF
key.
Intercom dial tone
Enter the Call Park Answer/Other Ext. access code (default
=
773
).
OR...
Enter the Call Park/Floating Hold Answer feature access
code (default =
*9
).
2. Dial the number of the extension that parked the call.
• Connected to parked call
Action
Result
1. Press the
HOLD
key.
• Current call on hold
2. Enter the Call Park Transfer access code (default =
774
).
