Panasonic S-ics Technical Manual Download

Page: 268 / 327

268

S-ICX (International) issued April 2002

S-ICX-64-700

Chapter 7. SLT Features

Section 700 - Operation

Operation

To make an outside call that requires an account code:

Hardware Requirements

•

A Call Logging printer or external call accounting system is required to collect account code

records.

Considerations

•

Account codes are not available during conversation recording mode for the Built-In Voice Mail.

•

Even though up to 10 digits may be entered, the system verifies the ID based on the first 4 digits

only.

•

Account codes will be cancelled after using trunk queuing.-

•

Account codes are not available for a Dial Pulse SLT.

•

SLT telephones can only use account codes with outgoing calls only.

•

Account Codes interact with TRS (Call Barring) as shown in the following table:

Action

Result

1. Lift the handset.

Intercom dial tone

2. Enter the Verified Account ID code (default =

3. Enter the Account Code (max. 10 digits).

4. Press the

key.

5. Enter an exchange line access code (default = 9 or 81-84).

6. Dial the phone number.

Forced or Not Forced

Verified or

Non-Verified

TRS (Call Barring) Class

No Account Entry

Account Entry

Not Forced

Non-Verified

Extension Port Based TRS

Class

Extension Port Based TRS

(Call Barring) Class

Verified

Account Code Based TRS

(Call Barring) Class

Forced

Non-Verified

TRS (Call Barring) Class

for Forced Account Code

(FF1 0 19 0001)

Extension Port Based TRS

(Call Barring) Class

Verified

Account Code Based TRS

(Call Barring) Class

Summary of Contents for S-ics








































































































































































































































































































































Search results

Summary of Contents for S-ics

Reviews:

Related manuals for S-ics

Brands by name

Popular brands

Panasonic S-ics, Technical Manual

Search results

Summary of Contents for S-ics

Reviews:

Related manuals for S-ics

Brands by name

Popular brands