manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 131 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 131

Supports Rport (RFC 3581)

Description

Selects whether to add the 'rport' parameter to the top Via header field
value of requests generated. For details, refer to RFC 3581.

Value Range

•

Yes

•

No

Default Value

No

Configuration File Reference

SIP_ADD_RPORT (Page 346)

STUN

Description

Select whether to enable the STUN service.

Value Range

•

Yes

•

No

Default Value

No

Configuration File Reference

SIP_STUN_ENABLE (Page 346)

4.5.1.15  Security

Enable SSAF (SIP Source Address Filter)

Description

Selects whether to enable SSAF (SIP Source Address Filter) for the
SIP servers (registrar server, proxy server, and presence server).

Value Range

•

Yes

•

No

Note

•

If you select 

[Yes]

, the unit receives SIP messages only from

the source addresses stored in the SIP servers (registrar
server, proxy server, and presence server), and not from other
addresses. However, if 

[Outbound Proxy Server Address]

 in

4.5.1.4  Outbound Proxy Server

 is specified, the unit also

receives SIP messages from the source address stored in the
SIP outbound proxy server.

Default Value

No

Configuration File Reference

SIP_DETECT_SSAF (Page 349)

Document Version  2015-01  

Administrator Guide

131

4.5.1 SIP Settings [Line 1]–[Line n]

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments