manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 191 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 191

4.8.8.1  SNMP

Enable SNMP

Description

Specifies whether SNMP is enabled or disabled.

Value Range

•

Yes

•

No

Default Value

No

Configuration File Reference

SNMP_ENABLE (Page 265)

SNMP Manager IP

Description

Specifies the IP address of the SNMP manager.

Value Range

Max. 32 characters

Default Value

Not stored.

Configuration File Reference

SNMP_TRUST_IP (Page 265)

SNMP Port

Description

Specifies the port of the SNMP manager.

Value Range

1-65535

Default Value

Not stored.

Configuration File Reference

SNMP_PORT (Page 265)

SNMP Location

Description

Specifies the location for SNMP.

Value Range

Max. 256 characters

Default Value

Not stored.

Configuration File Reference

SNMP_SYS_LOCATION (Page 267)

4.8.8.2  SNMP v1/v2c

SNMP RO Community

Description

Specifies the SNMP v1/v2 read only community string.

Value Range

Max. 32 characters

Default Value

Not stored.

Document Version  2015-01  

Administrator Guide

191

4.8.8 SNMP

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments