manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 161 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 161

Tone Timings

Description

Specifies the pattern, in milliseconds, of stutter dial tones to notify that
a voice mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2,
on 2…) separated by commas.

Note

•

It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).

Value Range

1–132 characters
0–16000 (0: Infinite time)

Note

•

Avoid setting 1–50 for any of the values.

Default Value

560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0

Configuration File Reference

DIAL_TONE4_TIMING (Page 306)

4.6.6.5  Reorder Tone

Tone Frequencies

Description

Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.

Value Range

1–9 characters
0, 200–2000 (0: No tone)

Default Value

480,620

Configuration File Reference

REORDER_TONE_FRQ (Page 306)

Tone Timings

Description

Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.

Note

•

It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).

Value Range

1–60 characters
0–16000 (0: Infinite time)

Default Value

60,250,190

Note

•

Avoid setting 1–50 for any of the values.

Configuration File Reference

REORDER_TONE_TIMING (Page 307)

Document Version  2015-01  

Administrator Guide

161

4.6.6 Tone Settings

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments