manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 189 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 189

Value Range

1–40320

Default Value

10080

Configuration File Reference

CFG_CYCLIC_INTVL (Page 258)

Header Value for Resync Event

Description

Specifies the value of the "Event" header sent from the SIP server to
the unit so that the unit can access the configuration files on the
provisioning server.

Value Range

Max. 15 characters

Note

•

You cannot leave this field empty.

Default Value

check-sync

Configuration File Reference

CFG_RESYNC_FROM_SIP (Page 258)

4.8.6.2  Resync Configuration Files

Click 

[Resync]

 to resync the configuration files.

4.8.7  Management Server

This screen allows you to specify the management server settings.

4.8.7.1  Management Server

Management Server URL

Description

Specifies the URL of the management server.

Value Range

Max. 256 characters

Document Version  2015-01  

Administrator Guide

189

4.8.7 Management Server

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments