manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 299 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 299

MPAGE_DISC_TIM

Value Format

Integer

Description

Specifies the length of time, in seconds, within which the unit cannot
receive pages. When this timer expires, the incoming page will finish.

Value Range

1–10

Default Value

1

Web User Interface Reference

Disconnect Paging Timeout (Page 165)

MPAGE_DND_ENABLE

Value Format

Boolean

Description

Specifies whether to enable or disable the Do Not Disturb parameter.

Value Range

•

Y/Yes

 (Enable play paging)

•

N/No

 (Disable play paging)

Default Value

N

Web User Interface Reference

Paging DND (Page 165)

5.6.6  Per Multicast Group - Multicast Paging

MPAGE_ADDR

Value Format

String

Description

Specifies the multicast IP address for sending and receiving page
audio.

Value Range

Max. 127 characters (multicast IP address ranges from 224.0.0.0 to
239.255.255.255)

Default Value

Empty string

Web User Interface Reference

Address (No. 1-10) (Page 165)

MPAGE_PORT

Value Format

Integer

Description

Specifies the port for sending and receiving page audio.

Note

•

You should specify a port that is not used by any other features.

Value Range

1–65535

Default Value

60000

Document Version  2015-01  

Administrator Guide

299

5.6.6 Per Multicast Group - Multicast Paging

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments