manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 309 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 309

HOLD_ALARM_RPT

Value Format

Boolean

Description

Specifies whether the hold alarm is repeated.

Value Range

•

Y/Yes

 (Repeat)

•

N/No

 (No Repeat)

Default Value

Y

HOLD_ALARM_TIMING

Value Format

Comma-separated Integer

Description

Specifies the pattern, in milliseconds, of the hold alarm using up to 10
whole numbers (on 1, off 1, on 2, off 2…) separated by commas.

Value Range

0–16000 (0: Infinite time)

Note

•

Avoid setting 1–50 for any of the values.

Default Value

120,14880

CW_TONE1_FRQ

Value Format

Comma-separated Integer

Description

Specifies the dual-tone frequencies, in hertz, of call waiting tone 1 using
2 whole numbers separated by a comma.

Value Range

0, 200–2000 (0: No tone)

Default Value

425

CW_TONE1_GAIN

Value Format

Integer

Description

Specifies the gain, in decibels, of call waiting tone 1.

Value Range

(-80)–0

Default Value

0

CW_TONE1_RPT

Value Format

Boolean

Description

Specifies whether call waiting tone 1 is repeated.

Document Version  2015-01  

Administrator Guide

309

5.6.8 Tone Settings

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments