manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 303 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 303

Value Range

(-80)–0

Default Value

0

DIAL_TONE2_RPT

Value Format

Boolean

Description

Specifies whether Dial Tone 2 is repeated.

Value Range

•

Y/Yes

 (Repeat)

•

N/No

 (No Repeat)

Default Value

N

DIAL_TONE2_TIMING

Value Format

Comma-separated Integer

Description

Specifies the pattern, in milliseconds, of Dial Tone 2 using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.

Note

•

It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).

Value Range

0–16000 (0: Infinite time)

Note

•

Avoid setting 1–50 for any of the values.

Default Value

60,0

BUSY_TONE_FRQ

Value Format

Comma-separated Integer

Description

Specifies the dual-tone frequencies, in hertz, of busy tones using 2
whole numbers separated by a comma.

Value Range

0, 200–2000 (0: No tone)

Default Value

480,620

Web User Interface Reference

Tone Frequencies (Page 159)

BUSY_TONE_GAIN

Value Format

Integer

Description

Specifies the gain, in decibels, of the busy tone.

Value Range

(-80)–0

Document Version  2015-01  

Administrator Guide

303

5.6.8 Tone Settings

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments