manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 389 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 389

7.2.5  Sniffer Dump

Sniffer Dump (

®

 see Page 217) is used to capture packets on the network and export them for analysis. For

details about the Sniffer Dump function, consult your phone system dealer.

7.3  QoS Status (Voice Quality Monitoring)

QoS Status (

®

 see Page 94) under the [Status] tab of the web user interface can be used to check the codec

used and the voice quality of phone calls with the unit. When on a phone call check the information displayed
under QoS Status to check the quality of communications. The following items are displayed under QoS
Status.

Item

Description

Codec

Displays the codec used.

MOS-CQ

Displays the mean opinion score for conversation quality.

MOS_LQ

Displays the mean opinion score for listening quality.

Voice Quality

Displays the voice quality.

7.4  Importing/Exporting settings

Import Configuration File (

®

 see Page 181) and Export Configuration File (

®

 see Page 182) under the

[Maintenance] tab of the web user interface can be used to import and export web user interface and
provisioning settings that can be used for checking and adjusting settings.

7.5  SSH Settings (Debug Settings)

SSH (

®

 see Page 193) enables you to obtain detailed debugging information via an SSH client. For details

about the SSH function, consult your phone system dealer.

Document Version  2015-01  

Administrator Guide

389

7.5 SSH Settings (Debug Settings)

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments