manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 160 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 160

Default Value

60,500,440

Configuration File Reference

BUSY_TONE_TIMING (Page 304)

4.6.6.3  Ringing Tone

Tone Frequencies

Description

Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.

Value Range

1–9 characters
0, 200–2000 (0: No tone)

Default Value

440,480

Configuration File Reference

RINGBACK_TONE_FRQ (Page 304)

Tone Timings

Description

Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.

Note

•

It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).

Value Range

1–60 characters
0–16000 (0: Infinite time)

Note

•

Avoid setting 1–50 for any of the values.

Default Value

60,2000,3940

Configuration File Reference

RINGBACK_TONE_TIMING (Page 305)

4.6.6.4  Stutter Tone

Tone Frequencies

Description

Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated by
a comma.

Value Range

1–9 characters
0, 200–2000 (0: No tone)

Default Value

350,440

Configuration File Reference

DIAL_TONE4_FRQ (Page 305)

160

Administrator Guide

Document Version  2015-01  

4.6.6 Tone Settings

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments