Panasonic KX-UTG200 Setup Manual Download Page 183

Page: 183 / 412

4.8.2.3 Provision Configuration

Click

[Export]

to export the provisioning configuration file.

File Type

Description

Selects the type of provisioning configuration file to be exported.

Value Range

•

Standard

•

Product

•

Master

•

Initial

Default Value

Standard

4.8.3 Firmware Maintenance

This screen allows you to perform firmware updates automatically or manually.

4.8.3.1 Firmware Maintenance

Enable Firmware Update

Description

Selects whether to perform firmware updates when the unit detects a
change in the firmware version.

Note

•

Changing this setting may require restarting the unit.

•

Local firmware updates from the Web user interface (

see

4.8.4 Local Firmware Update

) can be performed regardless

of this setting.

Value Range

•

Yes

•

Default Value

Yes

Configuration File Reference

FIRM_UPGRADE_ENABLE (Page 253)

Document Version 2015-01

Administrator Guide

183

4.8.3 Firmware Maintenance

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Search results

Summary of Contents for KX-UTG200

Reviews:

Panasonic KX-UTG200, Setup Manual, Page: 183 / 412

Search results

Summary of Contents for KX-UTG200

Reviews: