manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 348 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 348

Default Value

10

SIP_PRIVACY

Value Format

Boolean

Description

Specifies whether to add the "Privacy" header to SIP messages.

Value Range

•

Y/Yes

 (Add the "Privacy" header)

•

N/No

 (Do not add the "Privacy" header)

Default Value

N

SIP_OUTPROXY_ADDR

Value Format

String

Description

Specifies the IP address or FQDN of the SIP outbound proxy server.

Value Range

Max. 127 characters (IP address in dotted-decimal notation or FQDN)

Default Value

Empty string

Web User Interface Reference

Outbound Proxy Server Address (Page 125)

SIP_OUTPROXY_PORT

Value Format

Integer

Description

Specifies the port number to use for communication with the SIP
outbound proxy server.

Value Range

1–65535

Default Value

5060

Web User Interface Reference

Outbound Proxy Server Port (Page 125)

SIP_TRANSPORT

Value Format

Integer

Description

Specifies which transport layer protocol to use for sending SIP packets.

Value Range

•

0 (UDP)

•

1 (TCP)

•

2 (TLS)

Default Value

0

Web User Interface Reference

Transport Protocol (Page 127)

348

Administrator Guide

Document Version  2015-01  

5.9.3 Per Line - SIP Settings

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments