manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 180 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 180

Value Range

•

Yes

•

No

Default Value

No

Use BroadWorks-based Call Control Services

Description

Specifies whether BroadWorks-based call control services are used.

Value Range

•

Yes

•

No

Default Value

No

4.7.6  Branding Settings

This screen allows you to change the Branding settings.

4.7.6.1  Branding Settings

Logo URL

Description

Specifies the URL of the logo which is downloaded from the application
service.

Value Range

Max. 128 characters

Default Value

Not stored.

Configuration File Reference

XMLAPP_LOGO_URL (Page 316)

Wallpaper URL

Description

Specifies the URL of the wallpaper which is downloaded from the
application service.

Value Range

Max. 128 characters

Default Value

Not stored.

180

Administrator Guide

Document Version  2015-01  

4.7.6 Branding Settings

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments