manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 387 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 387

7.2  Diagnostic Settings

The [Diagnostic] tab (

®

 see Page 195) of the web user interface contains applications that can be used to

gather system information about the unit in the form of logs.

7.2.1  Log Settings

General Settings

General Settings (

®

 see Page 195) is used to specify the type of logs outputted (

®

 see 

Log to standard

output (Page 195)

 and 

Log to file (Page 195)

) and the maximum log size (

®

 see 

Log file max size

(Page 195)

).

Upload Settings

Upload Setting (

®

 see Page 196) is used to specify the log server for uploading event logs and file names

used for logs. Log files will be uploaded to the log server once the specified file size is reached (

®

 see 

Upload

immediately once file is full (Page 196)

) or the specified upload time has expired (

®

 see 

Upload period

(Page 196)

).

Syslog Settings

Syslog Settings (

®

 see Page 196) is used to enable syslog and specify a Syslog server for the unit to send

log messages to. You can also specify the port used for the Syslog server and the type (severity) of logs sent

Document Version  2015-01  

Administrator Guide

387

7.2.1 Log Settings

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments