manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 187 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 187

Value Range

Max. 1024 characters

Default Value

Not stored.

Configuration File Reference

USR_PROV_SVR_URL (Page 259)

Authentication ID

Description

Specifies the authentication ID required to access the provisioning
server.

Value Range

Max. 127 characters (except ", &, ', @, ;, <, >, and space)

Default Value

Not stored.

Configuration File Reference

USR_PROV_SVR_AUTH_ID (Page 259)

Authentication Password

Description

Specifies the password required to access the provisioning server.

Value Range

Max. 127 characters (except ", &, ', @, ;, <, >, and space)

Default Value

Not stored.

Configuration File Reference

USR_PROV_SVR_AUTH_PASSWORD (Page 259)

Enable SIP PnP

Description

Specifies whether the unit can use SIP PnP to discover the URL of the
provisioning server.

Value Range

•

Yes

•

No

Default Value

Yes

Configuration File Reference

SIPPNP_ENABLE (Page 256)

Enable DHCP Option 160

Description

Specifies whether the unit can use DHCP option 160 to discover the
URL of the provisioning server.

Value Range

•

Yes

•

No

Default Value

Yes

Configuration File Reference

OPTION160_ENABLE (Page 255)

Document Version  2015-01  

Administrator Guide

187

4.8.6 Provisioning Maintenance

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments