manualshive.com logo in svg

Panasonic KX-UTG200, Setup Manual, Page: 349 / 412

Share
Download
Panasonic KX-UTG200 Setup Manual Download Page 349

SIP_ANM_DISPNAME

Value Format

String

Description

Specifies the text string to set as the display name in the "From" header
when making anonymous calls.

Value Range

Max. 64 characters

Default Value

Anonymous

SIP_ANM_USERNAME

Value Format

String

Description

Specifies the text string to set as the user name in the "From" header
when making anonymous calls.

Value Range

Max. 64 characters

Default Value

anonymous

SIP_ANM_HOSTNAME

Value Format

String

Description

Specifies whether to set an anonymous host name in the "From" header
when making anonymous calls.

Value Range

Max. 64 characters

Default Value

anonymous.invalid

SIP_DETECT_SSAF

Value Format

Boolean

Description

Specifies whether to enable SSAF for the SIP servers (registrar server,
proxy server, and presence server).

Value Range

•

Y/Yes

 (Enable SSAF)

•

N/No

 (Disable SSAF)

Note

•

If set to "

Y

", the unit receives SIP messages only from the

source addresses stored in the SIP servers (registrar server,
proxy server, and presence server), and not from other
addresses. However, if "

SIP_OUTPROXY_ADDR

" in 

5.9.3  Per

Line - SIP Settings

 is specified, the unit also receives SIP

messages from the source address stored in the SIP outbound
proxy server.

Default Value

N

Document Version  2015-01  

Administrator Guide

349

5.9.3 Per Line - SIP Settings

Summary of Contents for KX-UTG200





























































































































































































































































































































































































































Reviews:

No comments