Panasonic KX-TVS75, Installation Manual

Page: 99 / 318

5.1 STARTING UP
CUSTOMIZING THE SYSTEM
99
5.1.3 Starting the Quick Setup
Quick Setup is only available to the VT100 mode. The sequence must be followed through to
the end to take effect. If you press " \", you will have to start over. Quick setup may be
performed again without erasing prior data (for example, when adding a slave system).
At the System Administration Top Menu,
Type [5]
and
Press ENTER.
Screen output:
System Administration Top Menu 5
Table 23
PBX Type Required Procedures
KX-T308/T616 1 2 3 4 5 6 7 8
KX-T123211D/TA series/
T336/T96
*1
*1
Not available in US
1 3 4 5 6 7 8
Non-Panasonic System 1 3 4 5 6 7 8
KX-TD816/1232/500/308 1 4 5 6 8
Quick Setup Utility for connection to Panasonic KX-T series telephone system.
This utility provides a quick way of programming the Voice Processing System to operate
in a standard automated attendant or Voice Mail configuration when connected to a
Panasonic KX-T series telephone system. The system will prompt you to enter, modify or
confirm settings based upon which PBX type you select. By entering the appropriate
information in the following screens, the system sets PBX integration parameters,
identifies the extension numbers connected to it, creates default mailboxes, sets its ports to
handle callers with automated attendant or voice mail service, sets system passwords and
sets the time and date. Finally, it confirms that you want to activate the system based on the
information you entered, modified, or confirmed.
To proceed,
Press ENTER
. To exit and cancel Quick Setup now,
Press [\]
.