Panasonic KX-TVS75, Installation Manual

Page: 140 / 318

7.2 UTILITY COMMANDS
140
SYSTEM MAINTENANCE AND TROUBLESHOOTING
b. Press ENTER.
Do not type a password on this screen.
c. Press ENTER.
Do not type a password on this screen.
Note
The password entered on the screen will not appear. The VPS does not distinguish the
capital letter from the small letter.
7.2.4 Set Time (TIME)
The TIME command is used to set the system date and time. A number of system functions
require that the system time and date be set correctly. These functions include message waiting
notification, external message delivery, call-retries-after initial-failure-to-connect, and
automatic deletion of messages.
1.
Type TIME
, then
Press RETURN.
2.
Type
the current time.
3.
Type
the current date. For the year, type the last 2 digits.
Note
Enter the exact time and date. This command cannot be used when either the System
or the Message Manager is accessing the time setting feature.
7.2.5 Print Reports at Specified Time (PSET)
This command is used to issue system usage reports (Disk Usage Report/Port Usage Report/
Call Account Report) at a specified time each day by entering the PSET command. A printer
or data terminal must be connected to the VPS at the RS-232C port for the reports to be printed
or displayed.
Maximum 8 characters
NEW PASSWORD : =
VERIFICATION : =
$ TIME
Current time is 12:34, PM
Enter new time (HH:MM, AM/PM) : =
Current date is TUE AUG-3-1999
Enter new date (MM-DD-YY) : =