Panasonic KX-TVS75, Installation Manual

Page: 37 / 318

2.3 INSTALLATION STEPS
INSTALLATION
37
d)
Connect the computer to the voice processor with a Null Modem Cable (See 2.7.2
Connecting the RS-232C Cable).
e)
Turn the rotary switch to position 5.
f)
Turn the power on.
g)
Wait until the "warning" appears on the screen.
h)
Turn the rotary switch back to position 0.
CAUTION
If the rotary switch is not returned to position 0 after initialization, all programming will
be lost when the voice processor loses power!
6.
Perform Quick Setup. (See Section 5 CUSTOMIZING THE SYSTEM.)
7.
Check Quick Setup:
8.
Set up Class of Service (COS) for each user. Customize voice prompts if necessary. (See
Appendix B SYSTEM ADMINISTRATION)
9.
Perform Administrative Programming through the laptop. (See Appendix B SYSTEM
ADMINISTRATION)
• The Power Indicator on the Voice Processor should be solid.
• The screen output should be: [On Line].
If you do not see the "On Line" message, check the following:
• The line cord to the Voice Processor has 4 conductors.
• The programming on the KX-TD816/1232/308 is correctly set in System Program
[117].