Panasonic KX-TVS75, Installation Manual

Page: 110 / 318

5.2 PORT SETTING OPTIONS
110
CUSTOMIZING THE SYSTEM
FTX for inband signaling. In other words, the voice processor dials the flash, waits for intercom
tone and dials the extension number. By default the KX-TVS75/100/200 will stay on the line
to monitor the status of the call. If the extension user answers the voice processor will announce
"you have a call" prior to releasing the call. This can be alleviated by adding the letter "A" or
"D" to the sequence. "A" stands for answer; the call will be transferred without the "you have
a call.." For a blind or unscreened transfer, add the letter "D" for disconnect.
5.2.3 Custom Service Programming
After the tree is complete, enter the System Programming Custom Service Settings Menu.
Access the Custom Service Setting Menu through the following sequence:
System Administration Top Menu:
The system then asks what Custom Service number you want to edit. Enter the desired number
(1-100).
The Custom Service screen is displayed:
Enter The Number: =
1
(Program)
Enter The Number: =
4
(Service Settings)
Enter The Number: =
2
(Custom Service)
Prompt Mode(1:Sys 2:User1 3:User2) ------
Menu Repeat Cycle (1-3) ---------------------
Call Transfer Anytime(Extn./Mbx/No) -----
Wait for Second Digit (1-5 seconds) --------
No DTMF Input Operation(a-f) --------------
Keypad Assignment
1: 2: 3:
4: 5: 6:
7: 8: 9:
: d 0: c #:
Please choose one of the following functions or services:
a. Transfer to Mailbox
b. Transfer to Extension
c. Operator
d. Exit
e. Previous Menu
f. Custom Service
g. Voice Mail Service
Program - Service Setting - Custom Service Setting - Custom 1
Description -------------------------------------- |.....................
|.....................
| System
| 3 times
| Extn.
| 1 seconds
| c
h. Call Transfer Service
i. Subscriber Service
j. Department Dialing
k. Dial by Name
l. Repeat Menu
m. Main Menu
n. Fax Transfer