Panasonic KX-TVS75, Installation Manual

Page: 82 / 318

4.2 CONNECTING THE KX-TVS75/100/200 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308
82
INTEGRATING THE VPS WITH THE PANASONIC KX-TD DIGITAL PBX
11.
Go to the System Administration Top Menu. Select
[5]
for Quick Setup and follow the
Automatic Configuration Instructions.
Turn the rotary switch to position 0 after initialization is complete.
4.2.2 KX-TD1232 Software Verification and Programming via the
Operating and Maintenance tool
Follow these steps after communication between the KX-TD1232 and the programming
software has been established. Refer to the Operating and Maintenance manual for
connection information.
1.
Check the software version.
a)
Go to the Main Menu.
Press
the
ALT
key and the letter
[V]
at the same time.
b)
Verify the Operating and Maintenance version being used.
This version must be 3.00 or higher to program the KX-TD1232 for Digital
Integration.
Note
If you have an older version of the maintenance tool but have the correct ROM
version in the system, you may still program the KX- TD1232 but you must
program using the Manager's Extension.
TEST: Go to intercom Press tone and Press [165]. If the VPS answers,
you have a DPT connection.
The required programming is complete and the VPS and KX-TD1232 should be able to
communicate through Digital Integration.
We recommend that the KX-TD1232 system have any optional extension cards and telephones
connected before starting the VPS.When running the Quick Setup command (Section 5
CUSTOMIZING THE SYSTEM) from the VPS, the PBX transmits the station information
automatically. This saves time when programming the VPS.
Sample display: DB data (PC): Empty
Version:3.00MUK