Panasonic KX-TVS75, Installation Manual

Page: 142 / 318

7.2 UTILITY COMMANDS
142
SYSTEM MAINTENANCE AND TROUBLESHOOTING
Device Error Log Indications
* = Port number (TVS75: 1-2, TVS100: 1-4, TVS200: 1-12)
Error Indications at System Startup
Example of a terminal display when errors are generated
Table 31
Indication Meaning
CPU MEM-GET CPU card software memory acquisition error.
CPU card is short of memory temporarily because
of too much traffic.
CLOCK Clock access error. Clock IC is out of order.
Check the hardware.
DISK DATA R/W (xx:yyyy) HDD access error. If there is a sector that often
causes errors, check the disk.
xx :
IDE error code
yyyy : read/write error sector number
DSP* SCAN DSP-SCAN error. DSP is out of order. Check the
hardware.
DSP* FIFO DSP/FIFO error. During the system is handing
calls, there is wrong with DSP and FIFO memory
temporarily.
CPU APPLICATION (x) Application error. While the system is handling
calls, temporary application error occurs.
x: port number
Table 32
Indication Meaning
ROM ERROR : Sum Error!! ROM checksum error.
DISK ERROR : Initialize Error!! HDD initialization error.
DISK ERROR : No System!! No system HDD present.
DISK ERROR : Program Load Error!! Program could not be loaded from system HDD.
DISK ERROR : Program Sum Error!! Checksum error in program loaded from system
HDD.
DISK ERROR : System Data Error!! Error Loading of administrator data from system
HDD.
SYSTEM ERROR : 1 Administrator data error.
SYSTEM ERROR : 2 Error loading of report data.
SYSTEM ERROR : 3 Clock error.