Panasonic KX-TVS75, Installation Manual

Page: 150 / 318

7.2 UTILITY COMMANDS
150
SYSTEM MAINTENANCE AND TROUBLESHOOTING
Note
The "Total Number of Registered" shown at the bottom of the screen, does not
include the prompts that have been turned off.
7.2.16 Utility Command List (HELP)
The HELP command displays the list of all available utility commands.
1.
Type HELP
, then
Press RETURN.
7.2.17 Quick Setup (QSET)
This command is initially used to setup the VPS very roughly when you use your VPS for the
first time or after system initialization.
Type QSET
, then
Press RETURN.
The same menu as "Starting the Quick Setup" in Section
5.1 STARTING UP.
$ HELP
OFLN
ONLN
PASS
TIME
PSET
ELOG
SAVE
LOAD
GPRN
VERS
CREP [no]
CCLR [no]
MWL [count]
MRL [count]
MPLT [opt]
QSET
LMON
PUTD
$
: System Off-line
: System On-line
: Password setting
: Time & Date setting
: Report Print Out Time setting
: Device Error Log Listing
: VPS Program & Data Save (VPS
– > PC : Xmodem)
: VPS Program & Data Load (VPS < – PC : Xmodem)
: Parameter Global Printing (only ‘ ASCII Terminal ’ mode)
: Program Version Check
: Quick Setup
: Line Monitor
: DTMF Information Display (Don
’ t leave enabled after
troubleshooting.)
: Custom Menu Information List
: Custom Menu Access Counter Clear
: MWL Retry count set (1-3)
: Minimum Recording Length set (0-3)
: Registered User Prompt No. List
[opt] : 1
– > User Prompt 1
2 – > User Prompt 2
None – > User Prompt 1&2
[no] : Custom Menu No. (1-100)
[no] : Custom Menu No. (1-100/0) (0: Clear All)