Panasonic KX-TVS75, Installation Manual

Page: 148 / 318

7.2 UTILITY COMMANDS
148
SYSTEM MAINTENANCE AND TROUBLESHOOTING
7.2.12 Custom Service Menu Access Count Clear (CCLR)
Each Custom Service has an access counter that counts the number times the service has been
accessed. This command clears this counter.
Type CCLR, Press Space, and Enter
Custom Service Menu (1-100), then
Press RETURN
.
Note
Type CCLR 0 to clear the access counters of all Custom Services.
7.2.13 Message Waiting Lamp Retry Times (MWL)
This command is used to specify the number of times the VPS will attempt to turn on the
Message Waiting Lamp of the called extension. This setting is required when a PBX other than
the Panasonic KX-T series telephone system is used.
Note
This setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes."
Access: 3: Indicates that this Custom Service was accessed 3 times
by callers. This counter can be cleared, See
7.2.12
Custom Service Menu Access Count Clear
(CCLR).
Menu Msg.:
None: Indicates that the menu message for a Custom service is
"None (not recorded)".
[1]-Xfer Mbx
(101): Indicates that the caller will be transferred to the mailbox
101 by pressing [1]. If menu message is recorded, "Rec"
will appear.
[2]-Xfer Extn
(102): Indicates that the caller will be transferred to the
extension 102 by pressing [2].
[3]-Custom [21]: Indicates that the caller will be sent to Custom Service 21
by pressing [3].
$ CCLR 20
Custom Menu <20> Accessing Counter Cleared !!
$ MWL
Current Setting of M.W.L. Retry Count is 1
Enter M.W.L. Retry Count (1-3) =