Panasonic KX-TVS75 Installation Manual Download Page 311

Page: 311 / 318

Glossary

311

System Report

Eight System Reports can be acquired by the System Administrator or System Manager
upon request.

TIME

One of the utility commands. It is used to confirm or set the time and date of the VPS.

Two-Way Recording

(Available with D-PITS Integration only.) Allows a subscriber to record a conversation into
his/her mailbox.

Two-Way Transfer

(Available with D-PITS Integration only.) Allows a subscriber to record a conversation into
another person's mailbox.

Virtual Extension

See Logical Extension.

Voice Mail

A general term used for messages recorded over the phone from one person to another.

Voice Mail Button

(Available with D-PITS Integration only.) Allows one-touch access to the voice mailbox.
Subscribers can use a function or a CO key.

Voice Prompt

Recorded VPS instructions to callers. These are either system prompts or user prompts.

VPS

Voice Processing System (e.g., Panasonic KX-TVS75, KX-TVS100 and KX-TVS200).

Summary of Contents for KX-TVS75































































































































































































































































































































Search results

Summary of Contents for KX-TVS75

Reviews:

Related manuals for KX-TVS75

Brands by name

Popular brands

Panasonic KX-TVS75, Installation Manual

Search results

Summary of Contents for KX-TVS75

Reviews:

Related manuals for KX-TVS75

Brands by name

Popular brands