manualshive.com logo in svg

Panasonic KX-TDE100, Installation Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

3.5.6  T1 Card (KX-TDA0187)

Function

1-port T1 trunk card. EIA/TIA standard compliant.

LEDs

RJ45

To NT1 / Extension

AB

Accessories and User-supplied Items

Accessories (included):

 Ferrite core 

´

 1

User-supplied (not included):

 RJ45 connector

CAUTION

•

When connecting this optional service card to the trunk, connect through NT1; do not connect to the
trunk directly.

•

T1 ports are SELV ports and should only be connected to SELV services.

Notice

When connecting the RJ45 connector, attach the included ferrite core (except in Canada, where the ferrite
core is not necessarily required). Refer to "3.2.9  Attaching a Ferrite Core".

Note

•

This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.

•

To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "3.16.1  Starting the
PBX".

Switch Settings

Switch

Type

Usage and Status Definition

A/B

Slide

Select A (default) for trunk or B for extension use.

Installation Manual

99

3.5.6 T1 Card (KX-TDA0187)

Summary of Contents for KX-TDE100







































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

Popular brands

Load more brands