manualshive.com logo in svg

Panasonic KX-TDE100, Installation Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

4.

Place the antennas so that they are pointing in directions that are 90 degrees apart (for antenna diversity),
as follows:

45º

45º

90º

Reference for Wall Mounting (KX-TDA0158CE)

Please copy this page and use as a reference for wall mounting.

Install a screw here.

Install a screw here.

83 mm

Note

Make sure to set the print size to correspond with the size of this page. If the dimension of the paper output
still deviates slightly from the measurement indicated here, use the measurement indicated here.

188

Installation Manual

3.9.8 Wall Mounting

Summary of Contents for KX-TDE100







































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

Popular brands

Load more brands