manualshive.com logo in svg

Panasonic KX-TDE100, Installation Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

3.3.3  RMT Card (KX-TDA0196)

Function

Analogue modem card for remote communication with the PBX. ITU-T V.90 support. To be mounted on the
IPCMPR card.

inside

RMT Card

Screw 

IPCMPR Card 

Accessories and User-supplied Items

Accessories (included):

 Screws 

´

 2

User-supplied (not included):

 none

Installation Manual

89

3.3.3 RMT Card (KX-TDA0196)

Summary of Contents for KX-TDE100







































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

Popular brands

Load more brands