manualshive.com logo in svg

Panasonic KX-TDE100, Installation Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

3.5.4  CID8 Card (KX-TDA0193)

Function

8-port Caller ID signal type FSK/FSK (with Call Waiting Caller ID [Visual Caller ID])/DTMF. To be mounted on
the LCOT8/LCOT16 cards.

CID8 Card

inside

Screw

OFF 

ON 

ON 

OFF 

SW2

LCOT16 card only

SW1

Accessories and User-supplied Items

Accessories (included):

 Screws 

´

 2

User-supplied (not included):

 none

Note

Only 1 CID8 card can be mounted on the LCOT8 card.

Switch Settings (on LCOT8/LCOT16 cards)

Switch

Type

Usage and Status Definition

Port Setting

DIP

Keep all DIP switches at default "ON" positions. Do not change the
positions of these switches.

Note

SW2 is for the LCOT16 card only.

96

Installation Manual

3.5.4 CID8 Card (KX-TDA0193)

Summary of Contents for KX-TDE100







































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

Popular brands

Load more brands