3.2.13 Floor Standing (KX-TDE200 Only)
CAUTION
•
Do not block the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides of
the shelf.
•
Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on the
back of the shelf will not be blocked.
•
Make sure that the surface behind the shelf is not made of wood.
Notice
Be careful not to drop the shelf.
1.
Install 4 anchor plugs in the floor, using the metal bracket as a template. Fix the metal bracket with 4 screws
(A).
TOP
30 mm
8 mm
Floor
Screw (A)
Metal Bracket
Anchor
Plug
Anchor
Plug
Hammer
Metal
Bracket
Screw (A)
2.
Remove the front cover of the shelf (refer to "3.2.3 Opening/Closing the Front Cover").
Installation Manual
79
3.2.13 Floor Standing (KX-TDE200 Only)
Summary of Contents for KX-TDE100
