manualshive.com logo in svg

Panasonic KX-TDE100, Installation Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

3.7.7  ESVM2 Card (KX-TDA0192) and ESVM4 Card (KX-TDA0194)

Function

ESVM2:

2-channel simplified voice message card for Built-in Simplified Voice Message feature. Also
supports MSG card features. To be mounted on the OPB3 card.

ESVM4:

4-channel simplified voice message card for Built-in Simplified Voice Message feature. Also
supports MSG card features. To be mounted on the OPB3 card.

Screw

ESVM Card

OPB3 Card 

inside

Accessories and User-supplied Items

Accessories (included):

 Screws 

´

 3

User-supplied (not included):

 none

CAUTION

When installing/uninstalling an ESVM card, be careful not to damage the chips around the connection
parts. Doing so may cause severe damage to the ESVM card.

Note

When using an ESVM card for the SVM feature, it must be mounted on sub-slot 3 (highest slot) of the
OPB3 card.

Installation Manual

145

3.7.7 ESVM2 Card (KX-TDA0192) and ESVM4 Card (KX-TDA0194)

Summary of Contents for KX-TDE100







































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

Popular brands

Load more brands