manualshive.com logo in svg

Panasonic KX-TDE100, Installation Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

4.

Slide the wall mounting plate in the direction of the arrow until it clicks.

KX-TDA0155

KX-TDA0158

5.

Hook the CS on the screw heads.

KX-TDA0155

Washer

Drive the screw 
to this point.

KX-TDA0158

Drive the screw 
to this point.

Washer

6.

Place the antennas so that they are pointing in directions that are 90 degrees apart (for antenna diversity),
as follows:

45º

45º

90º

246

Installation Manual

3.11.8 Wall Mounting

Summary of Contents for KX-TDE100







































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

Popular brands

Load more brands