manualshive.com logo in svg

Panasonic KX-TDE100, Installation Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

4. Finish the site survey

Refer to "3.11.6  After Site Survey".

a.

Turn off the PS.

b.

Stop supplying power, and return all DIP switches of each CS to the OFF position.

5. Connect the CS and PS to the PBX and test the operation

Refer to "3.11.7  Connecting a Cell Station to the PBX".

a.

Connect the CSs to the PBX.

b.

Register the PSs to the PBX.

c.

Walk around the service area while having a conversation using a registered PS. If noise is frequent or
conversations disconnect, relocate the CSs or install an additional CS.

6. Mount the CS on the wall

Refer to "3.11.8  Wall Mounting".

a.

If there are no problems in testing, mount the CS on the wall.

224

Installation Manual

3.11.2 Procedure Overview

Summary of Contents for KX-TDE100







































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

Popular brands

Load more brands